Faraday Power Systems

Instrumentation Installation
Inspection of Items supplied by the Customer.
Fabrication and Erection of Structural Steel.
Installation of cable duct , tray, junction box and excavation of trenches.
Laying of Main and Branch Signal / control / power cable /OFC.
Cable Glanding and Terminations.
Spicing and OTDR Testing.
Installation of instruments with supports and canopies.
Installation of local panels/Cabinets/Gauge boards.
Installation of main Air line piping and Air distribution headers.
Impulse piping and SS tubing.
Installation of control panels, marshalling cabinets and DCS consoles and related auxiliary activities.
Prefab cable,RS-485,Ethernet Cable laying and Termination.
Earth Pit and Earth Cable Laying.
Installation of MCT blocks.
Analyzer cabinets/ Shelter with accessories.
Installation of various types of Detector Systems.
CCTV
PA/GA Systems
Telecommunication systems

Our Testing Instruments
Fluke Pressure gauge- Model :700G05
Fluke Pressure gauge-0-700kg/cm2 Model :2700G
Fluke Low pressure pump kit 100PSI/7BAR- Model: 700LTP-1
Fluke Hydraulic test pump kit 0 PSI to 10000PSI Model: 700HTP2
Fluke Process Calibrator-Model:725
Fluke reference Pressure gauge 0 to 10000 PSI
Fluke High temperature field
Fluke RTD Calibrator
Digital Pressure Gauge- Druck-3 no.s
Loop calibrator- Fluke
Dead weight tester- Ravika (0 to 100 KG/CM2
Dead weight tester- Nagman ( 0 to 600 Bar)
Pressure Calibrator- R&D (0 TO 350 KG/CM2)
Pressure Calibrator- R&D –(1 TO 40 Bar)
Const Process Calibrator-3 no.s
Test Gauge – Ravika ( 0 TO 200 KG/ CM2)
High Pressure Comparator – Kains (0 TO 1000 KG/CM2)
Low Pressure Comparator – Nagman (Vacuum TO 2 Bar)
Hart Communicator- Rosemount Model:375
Hart Communicator- Rosemount Model:475
Dry block temperature calibrator- R&D (50 TO 650 ° C)
Dry block temperature calibrator-Nagman (50 TO 650 ° C)
Hydro Pneumatic Test Rig- Gem engineering
Universal Calibrator- Radix
Megger (Analog) - Waco
Megger (Digital) – Hioki
Megger: Rish
Air compressor
Fluke Digital Multimeter-Model:17B+-6 no.s
Rish Multimeter Model:14S
Vernier caliper
Analog pressure gauges from range 0-200Kg/cm2
Millivolt Calibrator-R&D

Calibration / Maintenance of Instruments
Pressure/ Vacuum Gauges
Pressure Switches
Pressure Transmitters
Differential Type Flow/Level /Pressure Transmitter and Gauges
Temperature gauge
Temperature Transmitters/Multiplexer
RTD/ Thermo couple
Thermo meters
Temperature Switches
Digital Temperature Controllers
Thermo well
Level Switch
Ultra sonic level transmitter
Level Gauges
Radar Type Level Transmitters
RF Type level Instruments
Level Transmitter.
On-Off /Control Valves
Safety Valves

Electrical
Erection, Testing, Commissioning of Switch Yard
Indoor – Outdoor Sub -Stations.
Interior Electrification of Corporate Office / Hotel / Malls
Erection and Testing of HT panels & HT Bus Ducts
Erection and Testing of Transformer
Erection and Testing of Sub Lighting Distribution Board
Erection and Testing of Push Button Station
Erection and Testing of Motor

Servicing of Valves
Pneumatic control valves (globe and rotary valves)
Globe and rotary valves like Balanced & Unbalanced Globe Valve’s, Top & Bottom Guided Double Seated Globe Valve’s, 3 Way Mixing & Diverting Globe valve’s, Ball Valve’s, Concentric &Eccentric Segmental Ball Valve’s, Butterfly valves etc....servicing and testing.
Valve Actuators
Linear and Rotary Actuators, Actuator Gear box - servicing and testing.
Mechanical valves
Mechanical valves LIKE Gate, Globe, Plug, Check, Ball, Butterfly, Cog, and ARV Valve etc... Servicing and testing.
Safety valves
Safety valves Dismantling, lapping assembling, testing and calibrating, as per Standard.
Regulator valves
Pressure Control Regulator valves, Pressure Reducing Regulator valves Servicing, Calibrating and testing.
Hydro/Pneumatic test and seat leak test doing as per standards (Hydro/ Pneumatic Testing mostly using standards FCI-70-2, API 598, API 527 etc...)
Handson experience in major branded valves like Flowserve, Dresser(GE), Orbit, Vanesa(Tyco), Virgo, Siemens, Emerson (Fischer) Cameron, Rotork, IL, MIL, KOSO.

Manpower Supply

As a part of continuous improvement in executing projects, we always attempt to provide value added services to our clients. It is our privilege to offer tailor made services package to our valued customers, thoroughly understanding the individual needs. And that is why; we have created a team of highly competent and experienced personnel to deploy at client's work place.

Store keepers
Engineers
Safety officer
Supervisors
Welders
Fitters
Electrical Technician
Instrument Technician
Electricians
Helper

Our Services

We’re On Call 24/7 to React Promptly to Your Service Needs